Part-number /  Description

Photo

Used For

Product Spec

AUX-5500

RS232 to 485 converter

Click here for manual

To change RS-232 signal into RS485 or vice-versa, therefore provide long-range control capability to surveillance or industrial devices for a PC.

Voltage:DC  5V, supplied by host via USB cable

Connectivity:

• USB mini B type male (DC power)
• D-sub 9 pin connector (RS232)
• 2-pin terminal block (RS-485)

Baud rate:1.2K to 115.2K per second
RS485 Terminating impedance: 150 ohms

LED indicators:

• Red for power
• Green for RX
• Yellow for TX

AUX-5501

USB to RS485 converter

Click here for manual

To change USB signal into RS485 or vice-versa, therefore provide long-range control capability to surveillance or industrial devices for a PC.

Voltage:DC 5V, supplied by host via USB cable

Connectivity:

• USB mini B type male (host)
• 2-pin terminal block (RS-485)

Baud rate:1.2K to 115.2K per second
RS485 Terminating impedance: 150 ohms

LED indicators:

• Red for power
• Green for RX
• Yellow for TX

AUX-5502

USB to RS232 converter

Click here for manual

To change an USB 1.0 or 1.1 signal into RS-232 format, and vice-versa, useful on building communication between two computer-based products for short range.

Voltage:DC 5V, supplied by host via USB cable

USB compatibility:v1.0 or 1.1

Connectivity:

• USB mini B type male (host)
• D-sub 9 connector (RS232)

Baud rate:1.2K to 115.2K per second

LED indicators:

• Red for power
• Green for RX
• Yellow for TX